Co-reporter:Christina Stangel;Asterios Charisiadis;Galateia E. Zervaki;Georgios Charalambidis;Vasilis Nikolaou;Georgios Rotas;Nikos Tagmatarchis;Athanassios G. Coutsolelos
The Journal of Physical Chemistry C March 9, 2017 Volume 121(Issue 9) pp:4850-4858
Publication Date(Web):January 25, 2017
DOI:10.1021/acs.jpcc.6b11863
In this study, a new modified C60 derivative with an oPE/oPPV conjugated bridge bearing two pyridyl groups has been used in combination with a flexible porphyrin dimer (ZnP2) to construct an electron donor/acceptor hybrid (C60-dipyr·ZnP2). This hybrid is based on metal to ligand coordination between the zinc centers of the porphyrin dimer and the two pyridyl groups that oPE/oPPV linker bears. In order to investigate the interactions between the electron donor and acceptor entities, both in the ground state and in the excited states, comprehensive photophysical assays have been carried out. In particular, both absorption and fluorescence titrations provided evidence for strong interactions between the electron donor and the electron acceptor within the hybrid. A binding constant (Kass) in the order of 5.0 × 105 M–1 has been derived. Furthermore, transient absorption measurements revealed intramolecular electron-transfer from the photoexcited porphyrin dimer (ZnP2) to the fullerene derivative (C60-dipyr), leading to a long-lived charge-separated state with a lifetime of up to 1525 ps.
Co-reporter:M. D. Weber, V. Nikolaou, J. E. Wittmann, A. Nikolaou, P. A. Angaridis, G. Charalambidis, C. Stangel, A. Kahnt, A. G. Coutsolelos and R. D. Costa
Chemical Communications 2016 vol. 52(Issue 8) pp:1602-1605
Publication Date(Web):23 Nov 2015
DOI:10.1039/C5CC06838J
The syntheses, as well as the photophysical and electrochemical characterization, of two novel BODIPY–porphyrin dyads and their first application in lighting schemes are provided. The benefits ascribed to their unique features, namely (i) a good electronic alignment, (ii) a remarkable efficient energy transfer, and (iii) excellent film morphology, lead to deep-red lighting devices with stabilities of around 1000 h and efficiencies of 0.13 Lm W−1.
Co-reporter:Anja Fingerhut;Yanlin Wu;Dr. Axel Kahnt;Dr. Julien Bachmann;Dr. Svetlana B. Tsogoeva
Chemistry – An Asian Journal 2016 Volume 11( Issue 8) pp:1232-1239
Publication Date(Web):
DOI:10.1002/asia.201501324
Abstract
Two new functionalized 4,4′-disubstituted 2,2′-bipyridines that were end-capped with cyanoacrylic acid or cyanoacrylic acid ester anchoring groups, which might allow their efficient functionalization on TiO2 or other metal-oxide semiconductor surfaces, have been synthesized and characterized by electrochemical, photophysical, and spectroscopic measurements. The electrochemical and photophysical properties of these 4,4′-disubstituted 2,2′-bipyridines with extended π systems, in particular their LUMO energies, make them promising candidates to build up inorganic–organic hybrid photosensitizers for the sensitization of metal-oxide semiconductors (e.g., TiO2 nanoparticles and/or nanotubes).
Co-reporter:Taru Nikkonen;Dr. María Moreno Oliva;Dr. Axel Kahnt;Mikko Muuronen;Dr. Juho Helaja;Dr. Dirk M. Guldi
Chemistry - A European Journal 2015 Volume 21( Issue 2) pp:
Publication Date(Web):
DOI:10.1002/chem.201590003
Co-reporter:Taru Nikkonen;Dr. María MorenoOliva;Dr. Stefan Taubert;Dr. Michele Melchionna;Dr. Axel Kahnt;Dr. Juho Helaja
Chemistry - A European Journal 2015 Volume 21( Issue 36) pp:12755-12768
Publication Date(Web):
DOI:10.1002/chem.201501856
Abstract
Two novel synthetic strategies to covalently link a metallocene electron-donor unit to a chlorin ring are presented. In one approach, pyropheophorbide a is readily converted into its 131-ferrocenyl dehydro derivative by nucleophilic addition of the ferrocenyl anion to the 131-carbonyl group. In another approach, the corresponding 131-pentamethylruthenocenyl derivative is synthesised from 131-fulvenylchlorin by a facile ligand exchange/deprotonation reaction with the [RuCp*(cod)Cl] (Cp*=pentamethylcyclopentadienyl; cod=1,5-cyclooctadiene) complex. The resulting metallocene–chlorins exhibit reduced aromaticity, which was unequivocally supported by ring-current calculations based on the gauge-including magnetically induced current (GIMIC) method and by calculated nucleus-independent chemical shift (NICS) values. The negative ring current in the isocyclic E ring suggests the antiaromatic character of this moiety and also clarifies the spontaneous reactivity of the complexes with oxygen. The oxidation products were isolated and their electrochemical and photophysical properties were studied. The ruthenocene derivatives turned out to be stable under light irradiation and showed photoinduced charge transfer with charge-separation lifetimes of 152–1029 ps.
Co-reporter:Taru Nikkonen;Dr. María Moreno Oliva;Dr. Axel Kahnt;Mikko Muuronen;Dr. Juho Helaja;Dr. Dirk M. Guldi
Chemistry - A European Journal 2015 Volume 21( Issue 2) pp:590-600
Publication Date(Web):
DOI:10.1002/chem.201404786
Abstract
In the present study, a biomimetic reaction center model, that is, a molecular triad consisting of a chlorin dimer and an azafulleroid, is synthesized and its photophysical properties are studied in comparison with the corresponding molecular dyad, which consists only of a chlorin monomer and an azafulleroid. As evidenced by 1H NMR, UV/Vis, and fluorescence spectroscopy, the chlorin dimer–azafulleroid folds in nonpolar media into a C2-symmetric geometry through hydrogen bonding, resulting in appreciable electronic interactions between the chlorins, whereas in polar media the two chlorins diverge from contact. Femtosecond transient absorption spectroscopy studies reveal longer charge-separated states for the chlorin dimer–azafulleroid; ≈1.6 ns in toluene, compared with the lifetime of ≈0.9 ns for the corresponding chlorin monomer–azafulleroid in toluene. In polar media, for example, benzonitrile, similar charge-separated states are observed, but the lifetimes are inevitably shorter: 65 and 73 ps for the dimeric and monomeric chlorin–azafulleroids, respectively. Nanosecond transient absorption and singlet oxygen phosphorescence studies corroborate that in toluene, the charge-separated state decays indirectly via the triplet excited state to the ground state, whereas in benzonitrile, direct recombination to the ground state is observed. Complementary DFT studies suggest two energy-minima conformations, that is, a folded chlorin dimer–azafulleroid, which is present in nonpolar media, and another conformation in polar media, in which the two hydrophobic chlorins wrap the azafulleroid. Inspection of the frontier molecular orbitals shows that in the folded conformation, the HOMO on each chlorin is equivalent and is shared owing to partial π–π overlap, resulting in delocalization of the conjugated π electrons, whereas the wrapped conformation lacks this stabilization. As such, the longer charge-separated lifetime for the dimer is rationalized by both the electron donor–acceptor separation distance and the stabilization of the radical cation through delocalization. The chlorin folding seems to change the photophysical properties in a manner similar to that observed in the chlorophyll dimer in natural photosynthetic reaction centers.
Co-reporter:Martin Klaumünzer, Axel Kahnt, Alexandra Burger, Mirza Mačković, Corinna Münzel, Rubitha Srikantharajah, Erdmann Spiecker, Andreas Hirsch, Wolfgang Peukert, and Dirk M. Guldi
ACS Applied Materials & Interfaces 2014 Volume 6(Issue 9) pp:6724
Publication Date(Web):March 25, 2014
DOI:10.1021/am5004552
To optimize electron transfer and optoelectronic properties in nanoparticulate thin films for electronics we show the surface functionalization of ZnO nanorods by means of replacing surface active 2-[2-(2-methoxyethoxy)ethoxy]acetic acid (TODA) by a redoxactive organic component, that is, 5,10,15,20-(phenoxyacetat)-porphyrin bearing four carboxylic acids as possible ZnO anchors. Microscopy–transmission electron microscopy–and spectroscopy–optical spectroscopy–verifies the successful and homogenous integration of the porphyrin onto the surface of ZnO nanorods, a process that is facilitated by the four anchoring groups. Photophysical investigations based on emission and absorption spectroscopy prompt to distinct electronic interactions between ZnO nanorods and the porphyrins. Consequently, we performed further photophysical studies flanked by pulse radiolysis assays to corroborate the nature of the electronic interactions.Keywords: electronic interactions; laser photolysis; pulse radiolysis; redox active porphyrins; surface functionalization; ZnO nanorods;
Co-reporter:Axel Kahnt, Katrin Peuntinger, Claudia Dammann, Thomas Drewello, Ralf Hermann, Sergej Naumov, Bernd Abel, and Dirk M. Guldi
The Journal of Physical Chemistry A 2014 Volume 118(Issue 25) pp:4382-4391
Publication Date(Web):May 12, 2014
DOI:10.1021/jp501947y
We report on a mechanistic investigation regarding the reduction of [CoIII(dmgH)2(py)(Cl)] (dmg = dimethylglyoxime) by several complementary techniques. The reduction of [CoIII(dmgH)2(py)(Cl)] was initiated by either electrochemical, photochemical, or pulse radiolytical techniques, and the corresponding products were analyzed by ESI mass spectrometry. In addition, all of the rate constants for each step were determined. We have found solid experimental as well as theoretical evidence for the appearance of a dinuclear complex [CoIICoIII(dmgH)4(py)2(H2O)2]+ to be the final product of reduction, implying the initially reduced form of [CoIII(dmgH)2(py)(Cl)] undergoes a dimerization with the starting material in solution.
Co-reporter:Georgios Rotas, Georgios Charalambidis, Lukas Glätzl, Daniel T. Gryko, Axel Kahnt, Athanassios G. Coutsolelos and Nikos Tagmatarchis
Chemical Communications 2013 vol. 49(Issue 80) pp:9128-9130
Publication Date(Web):14 Aug 2013
DOI:10.1039/C3CC45191G
The preparation and characterization of the first corrole–azafullerene dyad are described. The photophysical and electrochemical properties of the new corrole–C59N dyad were examined and it was found that photoexcitation of the corrole unit leads to the formation of a charge separated state.
Co-reporter:M. D. Weber, V. Nikolaou, J. E. Wittmann, A. Nikolaou, P. A. Angaridis, G. Charalambidis, C. Stangel, A. Kahnt, A. G. Coutsolelos and R. D. Costa
Chemical Communications 2016 - vol. 52(Issue 8) pp:NaN1605-1605
Publication Date(Web):2015/11/23
DOI:10.1039/C5CC06838J
The syntheses, as well as the photophysical and electrochemical characterization, of two novel BODIPY–porphyrin dyads and their first application in lighting schemes are provided. The benefits ascribed to their unique features, namely (i) a good electronic alignment, (ii) a remarkable efficient energy transfer, and (iii) excellent film morphology, lead to deep-red lighting devices with stabilities of around 1000 h and efficiencies of 0.13 Lm W−1.
Co-reporter:Georgios Rotas, Georgios Charalambidis, Lukas Glätzl, Daniel T. Gryko, Axel Kahnt, Athanassios G. Coutsolelos and Nikos Tagmatarchis
Chemical Communications 2013 - vol. 49(Issue 80) pp:NaN9130-9130
Publication Date(Web):2013/08/14
DOI:10.1039/C3CC45191G
The preparation and characterization of the first corrole–azafullerene dyad are described. The photophysical and electrochemical properties of the new corrole–C59N dyad were examined and it was found that photoexcitation of the corrole unit leads to the formation of a charge separated state.